IIS WCF net.tcp绑定错误(IIS WCF net.tcp binding error)
我知道有很多这方面的问题,我试过它们并且它没有用......我在WS8上使用IIS8,将net.tcp添加到协议列表并绑定到808,我仍然收到此错误:
System.InvalidOperationException: Could not find a base address that matches scheme net.tcp for the endpoint with binding NetTcpBinding. Registered base address schemes are [http].
我正在尝试使用以下浏览器在浏览器中打开服务:
http://192.168.1.101:64410/eve/relay/ClientRelayService.svc
:http://192.168.1.101:64410/eve/relay/ClientRelayService.svc
:http://192.168.1.101:64410/eve/relay/ClientRelayService.svc
我在一个端口为64410的站点上运行了2个测试服务(一个是basichttp,另一个应该是tcp)。其他服务正常运行。
这是我的服务器端配置:
<?xml version="1.0"?> <configuration> <appSettings/> <system.web> <compilation debug="true" targetFramework="4.0"/> <customErrors mode="Off"/> <trust level="Full" /> <httpRuntime/> </system.web> <system.serviceModel> <bindings> <netTcpBinding> <binding name="tcpBinding" transferMode="Streamed" portSharingEnabled="true"> <reliableSession enabled="true" /> <security mode="None"> <transport clientCredentialType="None" protectionLevel="None" /> <message clientCredentialType="None" /> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Eve.API.Services.Relay.RemoteRelayService"> <host> <baseAddresses> <add baseAddress="http://localhost:64410/eve/relay/" /> </baseAddresses> </host> <endpoint address="" binding="basicHttpBinding" contract="Eve.API.Services.Contracts.Services.Interfaces.IEveAPIService"/> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> <service name="Eve.API.Services.Relay.RelayService"> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:808/eve/relay/ClientRelayService.svc"/> </baseAddresses> </host> <endpoint address="" binding="netTcpBinding" bindingConfiguration="tcpBinding" contract="Eve.API.Services.Contracts.Services.Interfaces.IRelayService"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="tcpmex" binding="mexTcpBinding" contract="IMetadataExchange"/> <!--<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>--> </service> </services> <behaviors> <serviceBehaviors> <behavior> <!-- TODO Set to false on deploy --> <serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="true"/> </behavior> </serviceBehaviors> </behaviors> <protocolMapping> <add binding="basicHttpsBinding" scheme="https"/> </protocolMapping> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" minFreeMemoryPercentageToActivateService="1" multipleSiteBindingsEnabled="true"/> </system.serviceModel> <system.webServer> <modules runAllManagedModulesForAllRequests="true"/> <!-- TODO Set to false on deploy --> <directoryBrowse enabled="true"/> </system.webServer> </configuration>
I know there are many questions about this, I'we tried them all and it didn't work... I'm using IIS8 on WS8, added net.tcp to protocols list and binding to 808 and I still get this error:
System.InvalidOperationException: Could not find a base address that matches scheme net.tcp for the endpoint with binding NetTcpBinding. Registered base address schemes are [http].
I'm trying to open service in browser using:
http://192.168.1.101:64410/eve/relay/ClientRelayService.svc
I'm runing 2 test services (one is basichttp and other should be tcp) on a site with port 64410. Other service is working as should.
Here's mine server side config:
<?xml version="1.0"?> <configuration> <appSettings/> <system.web> <compilation debug="true" targetFramework="4.0"/> <customErrors mode="Off"/> <trust level="Full" /> <httpRuntime/> </system.web> <system.serviceModel> <bindings> <netTcpBinding> <binding name="tcpBinding" transferMode="Streamed" portSharingEnabled="true"> <reliableSession enabled="true" /> <security mode="None"> <transport clientCredentialType="None" protectionLevel="None" /> <message clientCredentialType="None" /> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Eve.API.Services.Relay.RemoteRelayService"> <host> <baseAddresses> <add baseAddress="http://localhost:64410/eve/relay/" /> </baseAddresses> </host> <endpoint address="" binding="basicHttpBinding" contract="Eve.API.Services.Contracts.Services.Interfaces.IEveAPIService"/> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> <service name="Eve.API.Services.Relay.RelayService"> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:808/eve/relay/ClientRelayService.svc"/> </baseAddresses> </host> <endpoint address="" binding="netTcpBinding" bindingConfiguration="tcpBinding" contract="Eve.API.Services.Contracts.Services.Interfaces.IRelayService"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="tcpmex" binding="mexTcpBinding" contract="IMetadataExchange"/> <!--<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>--> </service> </services> <behaviors> <serviceBehaviors> <behavior> <!-- TODO Set to false on deploy --> <serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="true"/> </behavior> </serviceBehaviors> </behaviors> <protocolMapping> <add binding="basicHttpsBinding" scheme="https"/> </protocolMapping> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" minFreeMemoryPercentageToActivateService="1" multipleSiteBindingsEnabled="true"/> </system.serviceModel> <system.webServer> <modules runAllManagedModulesForAllRequests="true"/> <!-- TODO Set to false on deploy --> <directoryBrowse enabled="true"/> </system.webServer> </configuration>
原文:https://stackoverflow.com/questions/16126116
最满意答案
我认为问题纯粹是你在添加新条目之前没有清除之前的条目。 您应该在添加新数组之前清除
arraytoadd
数组:success: function (response) { //call the observableArray function with an empty array to clear it jobactivityVM.arraytoadd([]); for (var i = 0; i < response.d.length; i++) { var x = new TemplateFunction(); x.y1(response.d[i].Y1); x.y2=((response.d[i].Y2); jobactivityVM.arraytoadd.push(x); } }, //end of sucess att
@Robert Stanley and @James Thorpe ,thanks for your help . I tried your solutions @Robert ,I tried ist part of your solution and @james i tried your solution . The issue is i have to take the apply bindings off from the hyperlink click event .The multiple binding is causing an issue .
$(document).ready(function ()
// I have changed the logic of placing the code from the click event to document ready becaaue my dom is not refreshed if i just open and close the dialog and i am using the appply binding on the click event.
{
var $addJobActivityContainer = $("#divforjobactivity"); var $addJobActivityContainer = $("#divforjobactivity"); TemplateFunction = function () { var self = this; self.y2 =ko.observable(0); self.y1 = ko.observable(0); } // set the view model for JobActivity = function () { var self = this; self.errors = ko.observableArray(); self.arraytoadd = ko.observableArray(); self.addevent = function () { self.arraytoadd.push(new TemplateFunction()); } } jobactivityVM = new JobActivity(); ko.cleanNode($addJobActivityContainer[0]); ko.applyBindings(jobactivityVM, $addJobActivityContainer[0]); $(document).on("click", "[id*=hypJobActivity]", function () { var $tr = $(this).closest('tr'); // gets closest parent tr element to the anchor element var x1 = $(".x1", $(this).closest("tr")).html() obj = {}; obj.x1 = x1; $("#divforjobactivity").dialog({ height: 320,width: 1230,modal: true,
open:function (event,ui)
$.ajax({ //start ajax call for posting and getting the data back type: 'POST', url: 'PopupWebService.asmx/ReceiveandSendJobActivity', data: JSON.stringify({ item: obj }), contentType: "application/json; charset=utf-8", dataType: "json", success: function (response) {for (var i = 0; i < response.d.length; i++) { var x = new TemplateFunction(); x.y1(response.d[i].Y1); x.y2=((response.d[i].Y2); jobactivityVM.arraytoadd.push(x); } }, //end of sucess att close: function (event, ui) { $("#divforjobactivity").dialog("destroy"); $("#divforjobactivity").remove(); }, // end of close error: function (XMLHttpRequest, textStatus, errorThrown) { alert("Unable to retrieve requested information " + errorThrown); } //end of error }); //END OF DIALOG }); //end of document.ready
相关问答
更多-
在jQuery对话框中使用'binding'和select2'敲除'(Knockout 'with' binding and select2 in jQuery dialog)[2022-11-30]
当您使用Knockout时,强烈建议将外部库(如select2)封装在绑定中。 虽然你只初始化它们一次,但是在之后的任何时候都可以修改DOM,如template , foreach 。 你面临着两者的危险 当Knockout还没有渲染任何东西的时候,初始化select2太早,或者 淘汰赛并在稍后重新渲染标记,以便select2突然不再受限制 例如,当Department.selectedTeam更改时会发生这种情况。 我在这里发现了Knockouts的rniemeyer自己的一个快速和肮脏的select2绑 ... -
我看到两个可能会导致问题的问题: dialog('close')仅仅关闭对话框,但不会清空其内容。 如果你想清空对话框并将其返回到一个干净的状态,你想使用dialog('destroy') 。 你有几个load()函数调用串在一起,但没有任何回调。 因此,尝试从/Events/Edit/eventID加载内容的负载被触发,但是您立即再次显示该对话框。 load()函数有一个回调参数,当从传递给load()函数的url返回内容时,该参数将被执行。 这样,一旦从服务器接收到内容,就会显示对话框。 一种我认为可以 ...
-
尝试将按钮中的功能单击到外部功能,而不是: buttons: [{ text: "Save and Close", click: function(){ var nwcg=$('#ictdg').contents().find('#nwct').val(); alert(nwcg); // This Data Not Refress ??? $(this).dialog("close"); } }] 尝试: function getV ...
-
感谢评论 - 我没有提及/包含在示例中,我每次都清理页面因此没有添加重复的元素或id(任何时候只添加/呈现一个页面)。 我想我已经通过在挂起之前手动初始化页面来解决了这个问题 - 不确定它是否是“cozier”修复,但似乎有效: 在调用changePage()方法之前,我需要先初始化新页面:E.mobile.initializePage(); 再次感谢,乔恩。 thanks for the comment - I did not mention / include in the example, that ...
-
我认为问题纯粹是你在添加新条目之前没有清除之前的条目。 您应该在添加新数组之前清除arraytoadd数组: success: function (response) { //call the observableArray function with an empty array to clear it jobactivityVM.arraytoadd([]); for (var i = 0; i < response.d.length; i++) { ...
-
淘汰分页保留旧页面上的jquery对话框取消并打开(knockout paging retaining old page on jquery dialog cancel and open)[2021-11-28]
你几乎就在那里。 将您的ko.applyBindings更改为: var model = new StaticDataExample1(data); ko.applyBindings(model, document.getElementById("test")); 然后在close:选项后立即向$(...).dialog({ ... })选项添加一个open:函数: close: function () { }, open: function () { model. ... -
保存按钮不再有效,因为var popup - content不是有效的javascript。 如果有能力,我建议首先在编辑器中添加一些JSLint或JSHint功能。 现在,要完成你想要完成的任务,它应该是相当简单的。 我们将忽略一些潜在的地雷,并假设您已经识别出您的类,但您的保存功能应如下所示: function() { $(".my-table-cell").html($(".popup-content").val()); } The save button no longer works b ...
-
var count = 0; $("#button").click(function() { count++; if(count==5){ //load jquery dialog here } } var count = 0; $("#button").click(function() { count++; if(count==5){ //load jquery dialog here } }
-
解: 我变了至
问题解决了 :) Solution: I changed
toProblem solved :)
使用jQuery-ui对话框的Knockout组件忽略绑定(Knockout component using jQuery-ui dialog ignores bindings)[2022-03-19]
我相信你的问题是,在组件实例化完成之前,你需要调用$("#trashcan-dlg").dialog(...) 。 如果您将该部分代码更改为:您的click绑定应该开始工作 setTimeout(function () { $("#trashcan-dlg") .dialog({ resizable: false, height: "auto", width: "auto", modal: ...相关文章
更多- wcf测试工具
- 静态属性,直接把iis搞垮掉 Http error 503 Service Unavailable
- win2003系统APACHE、IIS6共用80端口最简单解决方案
- 顶 【CF 应用开发大赛】WeBot - 微信公众平台消息接口类库(nodejs)
- solr 4.4 Error filterStart 问题
- mahout基于Hadoop的CF代码分析
- eclipse里报:An internal error occurred during:
- WSDL binding 定义消息格式和协议细节
- Multicast over TCP/IP HOWTO
- 命令行运行Hbase: Session 0x0 for server null, unexpected error
最新问答
更多- 您如何使用git diff文件,并将其应用于同一存储库的副本的本地分支?(How do you take a git diff file, and apply it to a local branch that is a copy of the same repository?)
- 将长浮点值剪切为2个小数点并复制到字符数组(Cut Long Float Value to 2 decimal points and copy to Character Array)
- OctoberCMS侧边栏不呈现(OctoberCMS Sidebar not rendering)
- 页面加载后对象是否有资格进行垃圾回收?(Are objects eligible for garbage collection after the page loads?)
- codeigniter中的语言不能按预期工作(language in codeigniter doesn' t work as expected)
- 在计算机拍照在哪里进入
- 使用cin.get()从c ++中的输入流中丢弃不需要的字符(Using cin.get() to discard unwanted characters from the input stream in c++)
- No for循环将在for循环中运行。(No for loop will run inside for loop. Testing for primes)
- 单页应用程序:页面重新加载(Single Page Application: page reload)
- 在循环中选择具有相似模式的列名称(Selecting Column Name With Similar Pattern in a Loop)
- System.StackOverflow错误(System.StackOverflow error)
- KnockoutJS未在嵌套模板上应用beforeRemove和afterAdd(KnockoutJS not applying beforeRemove and afterAdd on nested templates)
- 散列包括方法和/或嵌套属性(Hash include methods and/or nested attributes)
- android - 如何避免使用Samsung RFS文件系统延迟/冻结?(android - how to avoid lag/freezes with Samsung RFS filesystem?)
- TensorFlow:基于索引列表创建新张量(TensorFlow: Create a new tensor based on list of indices)
- 企业安全培训的各项内容
- 错误:RPC失败;(error: RPC failed; curl transfer closed with outstanding read data remaining)
- C#类名中允许哪些字符?(What characters are allowed in C# class name?)
- NumPy:将int64值存储在np.array中并使用dtype float64并将其转换回整数是否安全?(NumPy: Is it safe to store an int64 value in an np.array with dtype float64 and later convert it back to integer?)
- 注销后如何隐藏导航portlet?(How to hide navigation portlet after logout?)
- 将多个行和可变行移动到列(moving multiple and variable rows to columns)
- 提交表单时忽略基础href,而不使用Javascript(ignore base href when submitting form, without using Javascript)
- 对setOnInfoWindowClickListener的意图(Intent on setOnInfoWindowClickListener)
- Angular $资源不会改变方法(Angular $resource doesn't change method)
- 在Angular 5中不是一个函数(is not a function in Angular 5)
- 如何配置Composite C1以将.m和桌面作为同一站点提供服务(How to configure Composite C1 to serve .m and desktop as the same site)
- 不适用:悬停在悬停时:在元素之前[复制](Don't apply :hover when hovering on :before element [duplicate])
- 常见的python rpc和cli接口(Common python rpc and cli interface)
- Mysql DB单个字段匹配多个其他字段(Mysql DB single field matching to multiple other fields)
- 产品页面上的Magento Up出售对齐问题(Magento Up sell alignment issue on the products page)